Rimark Aluminium
Aluminium Sheets
Aluminium Sheets are lightweight, non-corrosive and easily formed or engineered. Aluminium sheets are used for a wide range of applications such as chemical containers, vehicle body panels, lighting equipment, reflectors, signs, building materials and electronics.
Specifications
Alloy: 5005, Paper Interleaved Mill finish
Alloy 5005 available as a rolled sheets. Alloy, 5005 is the softest of all the 5xxx series Aluminium alloys. It has low levels of magnesium which gives it excellent corrosion resistance. Aluminium sheets are interleaved with special paper, foam sheets or other materials to protect the surfaces against abrasion.
Size Range
Standard Widths - 1200 mm
Standard Lengths - 2400 mm
Non standard widths and lengths will be cut on request
Thickness
0.6, 0.8, 1 mm
Temper
H34
Alloy: 5005, PE Coated finish
Alloy 5005 available as a rolled sheets. Alloy, 5005 is the softest of all the 5xxx series Aluminium alloys. It has low levels of magnesium which gives it excellent corrosion resistance. PE polyester is a chemical and is a painting material used for the surface coating of Aluminium sheets. PE coated Aluminium sheets are mainly used for interior wall decoration.
Size Range
Standard Widths - 1200 mm
Standard Lengths - 2400, 3000 mm
Non standard widths and lengths will be cut on request
Thickness
1, 1.2, 1.6, 2, 2.5, 3, 4, 5, 6 mm
Temper
H34
Alloy: 5005, Clear Anodised finish
Alloy 5005 available as a rolled sheets. Alloy, 5005 is the softest of all the 5xxx series Aluminium alloys. It has low levels of magnesium which gives it excellent corrosion resistance. By anodising, the surface of the materiel get a thicker layer of aluminium oxide to provide greater protection to the material.
Size Range
Standard Widths - 1200 mm
Standard Lengths - 2400 mm
Non standard widths and lengths will be cut on request
Thickness
1.6 mm
Temper
H34
Alloy: 5052/5251, Paper Interleaved Mill finish
Alloy 5052 contains 2.5% magnesium and 0.25% chromium. It is non-heat-treatable but can be hardened by cold work, for instance, cold rolling. 5251 is commonly offered as an alternative to 5052 because their composition and properties are similar. Aluminium sheets are interleaved with special paper, foam sheets or other materials to protect the surfaces against abrasion.
Size Range
Standard Widths - 1200 mm
Standard Lengths - 2400 mm
Non standard widths and lengths will be cut on request
Thickness
1.6, 2, 2.5, 3mm
Temper
H34
Construction Materials
Aluminium Plates
Carbon Steel plates are used in a variety of applications. We believe we offer a full solution to any carbon steel plate need in Melbourne. The material we supply meets the requirements of Australian Standard AS3678.
Specifications
Alloy: 5083, Mill finish
Alloy 5083 is well-known for the exceptionally good performance it delivers in extreme environments, 5083 is ideal for general industrial environments. It can be used in marine applications too. The mill finish is the standard finish that aluminium has when it comes out of the mill. There is a wide range of uses and applications for a mill finish. This is the natural state of aluminium and no mechanical or chemical finishing has been added to the surface.
Size Range
Standard Widths - 1200 mm
Standard Lengths - 2400 mm
Non standard widths and lengths will be cut on request
Thickness
3-100 mm
Temper
H112
Alloy: 6061, Mill finish
Alloy 6061 is a heat-treatable alloy with good weldability and resistance to corrosion. Alloy 6061 has medium to high strength and good for fabrication applications. It has only average machinability. The mill finish is the standard finish that aluminium has when it comes out of the mill. There is a wide range of uses and applications for a mill finish. This is the natural state of aluminium and no mechanical or chemical finishing has been added to the surface.