Rimark Steel
Steel Sheets & Coils
Steel sheets and coils have many applications in manufacturing. Rimark offers many different sizes, widths, lengths and specifications for steel sheets and coils to meet customer requirements.
Specifications
Hot rolled uncoated raw steel
Commercial quality sheet made of low carbon steel and intended for use in simple bending or moderate drawing and welding. Various applications, from agricultural equipment to automotive equipment, from blower and ventilation systems to hot air registers. Rimark hot rolled steel products conform to AS1594.
Size Range
Standard Widths - 900, 1200, 1500, 1800 mm
Standard Lengths - 1800, 2400, 3600, 6000 mm
Non standard widths and lengths will be cut on request
Thickness
1.6 - 6mm
Grades
HA1, HA3, HA4N, HW350, HA250, HA250, HA300, HA350, Blackform
Slit Coil
All sizes slit by request
Hot rolled uncoated pickled and oiled steel
Pickled & Oiled Sheets should be used when the tight oxide scale present on Hot Rolled Sheets is unacceptable. Pickled and Oiled Sheets with their superior smooth clean surface are recommended for stamping or ordinary drawing applications. After cleaning they can be painted or enamelled. Rimark hot rolled pickled & oiled products conform to AS1594.
Size Range
Standard Widths - 900, 1200, 1500 mm
Standard Lengths - 1800, 2400, 3600, 6000 mm
Non standard widths and lengths will be cut on request
Thickness
1.5 - 6mm
Grades
HA3, HA3P, HA3PO, Brightform
Slit Coil
All sizes slit by request
Cold rolled uncoated raw steel
Commercial grade cold rolled sheets are made of low carbon steel and are intended for exposed or unexposed parts such as bending, moderate drawing or forming and welding. Sheets of this quality have a high level of ductility and are more stable in performance due to the high standards of steel production, selection and processing. The surface finish is a dull matte texture. Rimark cold rolled steel products conform to AS1365.
Size Range
Standard Widths - 900, 1200 mm
Standard Lengths - 1800, 2400, 3600, 6000 mm
Non standard widths and lengths will be cut on request
Thickness
0.4-1.6mm
Grades
CA3, CM350, CA2SE, CA5SN-E, CA260, CV2S1
Slit Coil
All sizes slit by request
Galvanised steel
The list of capabilities for galvanised steel is extensive. The steel sheet can be punched, sheared, pressed, drawn or bent according to the requirement. It is ideal for marine applications as the surfacing is salt resistant and also resists other weather conditions. Our galvanised steel products conform to AS1397.
Size Range
Standard Widths - 900, 1200, 1500 mm
Standard Lengths - 1800, 2400, 3600, 6000 mm
Non standard widths and lengths will be cut on request
Thickness
0.25-2.9mm
Grades
G2, G3, G300, G450, G550
Slit Coil
All sizes slit by request
Steel Plates
Carbon Steel plates are used in a variety of applications. We believe we offer a full solution to any carbon steel plate need in Melbourne. The material we supply meets the requirements of Australian Standard AS3678.
Specifications
Mild Steel Plate
Mild steel plate has many applications in manufacturing. One example where steel plate can be found is in the manufacturing of vessels. Because of this they offer the ability to withstand tremendous weights and pressures.
Size Range
Standard Widths - 1800, 2400, 3000, 3200 mm
Standard Lengths - 6000, 9000 mm
Non standard widths and lengths will be cut on request
Thickness
3-250mm
Grades
Grade 250, Grade 350, WR350
Floor Plate
The steel floor plate is a flat sheet material with a slightly elevated, ‘tread’ pattern. The standard chequered tread pattern is universally recognised and used by most Australian industries. Aside from commercial applications, steel floor plates are commonly found on trailer or commercial vehicle floors. The pattern is applied to one side of the sheet, and the opposite side is flat or devoid of features.
Size Range
Standard Widths - 1200, 1500, 1800 mm
Standard Lengths - 3000, 6000, 9000 mm
Non standard widths and lengths will be cut on request
Thickness
2.1-8mm
Grades
Grade 250
Quenched & Tempered Steel Plate
Quenched and tempered plate, a steel that is stronger and harder than ordinary carbon steel. The product is used for the manufacture and repair of machinery and structures where greater abrasion resistance or higher yield strength are required.
Grade 80 is a high strength, low alloy structural steel with controlled carbon equivalent to optimise welding. Typical applications for Grade 80 include Transport equipment, Mining equipment, High-rise buildings, Excavator and loader buckets, Lifting equipment, Bridges and Storage tanks.
Grade 400 is a high hardness, abrasion-resistant steel with a controlled carbon equivalent to optimise welding. Typical applications for Grade 400 include Gear wheels, Wear liners, Storage bins/hoppers, Deflector plates and Earthmoving buckets.
Grade 500 is a medium carbon, high hardness and abrasion-resistant steel. Typical applications for Grade 500 include Dump truck wear liners, Chutes, Wear liners, Cutting edges and Ground-engaging tools.